Schluter KERDI-DRAIN Drain Adaptor Kit 5-1/4″ with ABS Plastic Adaptor and Stainless Steel Square Grate 4. The Schluter-KERDI-DRAIN-A adaptor kits are designed to convert clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical (e.g., when they are set in concrete slabs). The adaptor kit includes a stainless steel adaptor ring, available in 5-1/4″ (133 mm) and 7-1/2″ (191 mm) diameter sizes, with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring drains. The adaptor ring replaces the clamping ring and is attached to the existing drain body using the clamping ring bolts. This connection is made watertight via the rubber gasket and Schluter®-KERDI-FIX adhesive/sealant. The adaptor drain with integrated bonding flange slides into the adaptor ring with the over-molded rubber gasket ensuring a watertight seal. Adaptor kits are suitable for both mortar beds and KERDI-SHOWER-T/-TS/-TT shower tray applications.
Schluter KERDI-DRAIN Adaptor Kit 5-1/4″ with ABS Plastic Adaptor
Grate assemblies consist of a frame, which can be seamlessly adjusted to the thickness and layout of the ceramic tile or stone covering via the height adjustment collar and lateral adjustment ring and grates or cleanout covers that are placed within the frame. The 4″ (100 mm) standard grate assembly frame features an approximately 1/8″ (3 mm) wide reveal after installation, and grate/frame combinations are available in stainless steel in CLASSIC design or anodized aluminum in CONTOUR design, both available in a variety of finishes. The 4″(100 mm) KERDI-DRAIN-STYLE grate assembly frame features a minimal reveal after installation. It is made of brushed stainless steel and can be combined with one of three grate design options: FLORAL (E), CURVE (F), or PURE (G). Various metallic and color-coated finishes are available. The 4″ (100 mm) TILE grate is a square stainless steel plate with KERDI laminated on the surface to allow for bonding of ceramic or stone tile, which creates a virtually invisible drainage line. The 6″ (150 mm) square and round stainless steel grate assembly frames feature an approximately 3/16″ (5 mm) wide reveal after installation and can be combined with stainless steel grates in CLASSIC design or a square clean out cover. Notes: The 4″ (100 mm) TILE grate and the 6″ (150 mm) square and round grates and clean out cover are not compatible with the 5-1/4″ (133 mm) adaptor kits. The 6″ (150 mm) grate assemblies and grate assemblies used with the 5-1/4″ (133 mm) adaptor kits only allow vertical and tilt adjustment (no lateral adjustment).
- Adaptor kits are used when the clamping ring drain cannot be removed
- Kit includes a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains
- The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts
- Connection is made watertight via the rubber gasket and KERDI-FIX adhesive/sealant
- Suitable for both KERDI-SHOWER-T/-TS/-TT shower tray and mortar bed applications
- Compatible with KERDI-SHOWER-T/-TS/-TT shower base and mortar bed installations
- Adapter ring: Schluter-Systems L.P., U.S. Patent No. D593,641, other patents pending
Original price was: $199.00.$149.00Current price is: $149.00.
Related products
-
Add to cartAbout this item:
Product Code: KSK9651525PVCE
The Schluter-KERDI-SHOWER-KIT is an all-inclusive package containing each of the components required to create a watertight shower assembly. This kit includes : 1 KERDI-SHOWER-T/-TS/-TT shower tray 38″ x 60″ 2 KERDI-BOARD-SC shower curbs 38″ x 6″ x 4-1/2″ 1 roll KERDI waterproofing membrane 3′ 3″ x 33′ = 108 ft2 1 roll KERDI-BAND waterproofing strip 5″ x 33′ 1 KERDI-DRAIN PVC flange with 2″ outlet and 4″ stainless steel grate (E) 4 inside & 2 outside KERDI-KERECK preformed waterproofing corners 1 KERDI-SEAL-PS pipe seal 3/4″ 1 KERDI-SEAL-MV mixing valve seal 4-1/2″ 1 KERDI collar.
- Designed to create a fully waterproof and vapor-tight enclosure in tiled showers and residential steam showers
- Also includes KERDI-DRAIN with integrated bonding flange and stainless steel grate
- Includes shower base and threshold, membrane, and sealing strips
-
Sale!
Add to cartAbout this item:
Product Code: KSK1220ABSE
The Schluter-KERDI-SHOWER-KIT is an all-inclusive package containing each of the components required to create a watertight shower assembly. This kit includes : 1 KERDI-SHOWER-T/-TS/-TT shower tray 48″ x 48″ 1 KERDI-BOARD-SC shower curb 48″ x 6″ x 4-1/2″ 1 roll KERDI waterproofing membrane 3′ 3″ x 33′ = 108 ft2 1 roll KERDI-BAND waterproofing strip 5″ x 33′ 1 KERDI-DRAIN ABS flange with 2″ outlet and 4″ stainless steel grate (E) 4 inside & 2 outside KERDI-KERECK preformed waterproofing corners 1 KERDI-SEAL-PS pipe seal 3/4″ 1 KERDI-SEAL-MV mixing valve seal 4-1/2″.
- Designed to create a fully waterproof and vapor-tight enclosure in tiled showers and residential steam showers
- Also includes KERDI-DRAIN with integrated bonding flange and stainless steel grate
- Includes shower base and threshold, membrane, and sealing strips
-
Sale!
![Schluter KERDI-SHOWER-TS Prefabricated Sloped Shower Tray Kit with Center Outlet Position 1-1/8" x 38" x 60" -- [Copy]](https://westernbaths.ca/wp-content/uploads/2024/03/Screenshot-2024-03-02-at-12-31-30-Schluter-KERDI-SHOWER-T-Prefabricated-Sloped-Shower-Tray-Kit-with-Center-Outlet-Position-1-1_8-x-38-x-60-KST965_1525-FloorBox-300x300.png)
Add to cartAbout this item:
Product Code: KST965/1525
The trays are made of lightweight, expanded polystyrene (PS40) for constructing mortar-free shower bases. Each of these sloped, prefabricated shower trays are designed to integrate with the Schluter-KERDI-DRAIN. The KERDI-SHOWER-T is the standard tray and are available with center drain placement is available in 38″ x 60″ (97 x 152 cm), 48″ x 60″ (122 x 152 cm), 48″ x 72″ (122 x 183 cm), 60″ x 60″ (152 x 152 cm) and 72″ x 72″ (183 x 183 cm) sizes. The KERDI-SHOWER-TS with an off-center drain placement is available in 38″ x 60″ (97 x 152 cm), for bathtub replacements. KERDI-SHOWER-TT features a thin perimeter height that simplifies curbless shower construction and is available in 36” x 36” (91 x 91 cm), 32″ x 38″ (81 x 97 cm), 38” x 38” (97 x 97 cm), 36″ x 48″ (91 x 122 cm) and 48” x 48” (122 x 122 cm) sizes. The KERDI-SHOWER-TT is also available in a neo angle configuration in 38” x 38” (97 x 97 cm). The neo-angle tray features an off-center drain placement: 12” (30.5 cm) from the 38” sides of the tray.
- Package includes : 1 KERDI-SHOWER tray and 1 KERDI collar for sealing the drain-to-tray connection
- Waterproof and ready to tile
- Prevents mold and mildew
- Includes KERDI waterproofing membrane
- Quick and easy to install eliminating the need for a mortar bed
- Made of lightweight expanded polystyrene
- Available in thin perimeter heights to simplify construction of curbless showers
- Twelve sizes available, including a neo angle configuration and off-center drain for tub replacements
- Specifically designed to integrate with KERDI-BOARD-SC shower curbs, KERDI, and KERDI-DRAIN
-
Sale!
Add to cartAbout this item:
Product Code: KST965/1525S
The trays are made of lightweight, expanded polystyrene (PS40) for constructing mortar-free shower bases. Each of these sloped, prefabricated shower trays are designed to integrate with the Schluter-KERDI-DRAIN. The KERDI-SHOWER-T is the standard tray and are available with center drain placement is available in 38″ x 60″ (97 x 152 cm), 48″ x 60″ (122 x 152 cm), 48″ x 72″ (122 x 183 cm), 60″ x 60″ (152 x 152 cm) and 72″ x 72″ (183 x 183 cm) sizes. The KERDI-SHOWER-TS with an off-center drain placement is available in 38″ x 60″ (97 x 152 cm), for bathtub replacements. KERDI-SHOWER-TT features a thin perimeter height that simplifies curbless shower construction and is available in 36” x 36” (91 x 91 cm), 32″ x 38″ (81 x 97 cm), 38” x 38” (97 x 97 cm), 36″ x 48″ (91 x 122 cm) and 48” x 48” (122 x 122 cm) sizes. The KERDI-SHOWER-TT is also available in a neo angle configuration in 38” x 38” (97 x 97 cm). The neo-angle tray features an off-center drain placement: 12” (30.5 cm) from the 38” sides of the tray.
- Package includes : 1 KERDI-SHOWER tray and 1 KERDI collar for sealing the drain-to-tray connection
- Waterproof and ready to tile
- Prevents mold and mildew
- Includes KERDI waterproofing membrane
- Quick and easy to install eliminating the need for a mortar bed
- Made of lightweight expanded polystyrene
- Available in thin perimeter heights to simplify construction of curbless showers
- Twelve sizes available, including a neo angle configuration and off-center drain for tub replacements
- Specifically designed to integrate with KERDI-BOARD-SC shower curbs, KERDI, and KERDI-DRAIN
Reviews
There are no reviews yet.