Schluter-KERDI-DRAIN is a floor drain system with an integrated, wide bonding flange that provides a watertight bond to the KERDI waterproofing membrane on top of the assembly.
Sale!
Schluter KERDI-DRAIN Flange Kit – PVC Plastic 2″
About this item:
Product Code: KD2FLKPVC
- This kit includes : 1 drain with integrated bonding flange, 4 inside and 2 outside KERDI-KERECK preformed waterproofing corners, 1 KERDI-SEAL-PS pipe seal 3/4″, 1 KERDI-SEAL-MV mixing valve seal 4-1/2″
- Don’t forget! The KERDI-DRAIN grate kit must be selected separately
- Tamper-proof screws and matching key also available
Original price was: $99.00.$89.00Current price is: $89.00.
Category:
Schluter
Related products
-
Sale!
Add to cartAbout this item:
Product Code: DITRA150
Ditra is a polyethylene uncoupling membrane. It has a grid structure of square cutback cavities with an anchoring fleece laminated to the underside. The open rib structure allows for in-plane movement, which effectively neutralizes the movement stresses between the substrate and the tile to prevent cracking. The thickness of the tile assembly is minimized by using Ditra, which is only 1/8″ thick.- DITRA is a polyethylene uncoupling membrane which effectively neutralizes movement stresses between the substrate and the tile
- Eliminates the major cause of cracking and delaminating of tiled surfaces
- Features a grid structure of square cutback cavities and an anchoring fleece laminated to the underside
- Install over a wide range of substrates, including plywood/OSB, concrete, gypsum, heated floors, etc
- Easy to install and ready to receive tile immediately
- For commercial and residential applications
- Roll covers 150-sq ft
-
Sale!
Add to cartAbout this item:
Product Code: KSK1220ABSE
The Schluter-KERDI-SHOWER-KIT is an all-inclusive package containing each of the components required to create a watertight shower assembly. This kit includes : 1 KERDI-SHOWER-T/-TS/-TT shower tray 48″ x 48″ 1 KERDI-BOARD-SC shower curb 48″ x 6″ x 4-1/2″ 1 roll KERDI waterproofing membrane 3′ 3″ x 33′ = 108 ft2 1 roll KERDI-BAND waterproofing strip 5″ x 33′ 1 KERDI-DRAIN ABS flange with 2″ outlet and 4″ stainless steel grate (E) 4 inside & 2 outside KERDI-KERECK preformed waterproofing corners 1 KERDI-SEAL-PS pipe seal 3/4″ 1 KERDI-SEAL-MV mixing valve seal 4-1/2″.
- Designed to create a fully waterproof and vapor-tight enclosure in tiled showers and residential steam showers
- Also includes KERDI-DRAIN with integrated bonding flange and stainless steel grate
- Includes shower base and threshold, membrane, and sealing strips
-
Sale!
Add to cartGrate assemblies consist of a frame, which can be seamlessly adjusted to the thickness and layout of the ceramic tile or stone covering via the height adjustment collar and lateral adjustment ring and grates or cleanout covers that are placed within the frame. The 4″ (100 mm) standard grate assembly frame features an approximately 1/8″ (3 mm) wide reveal after installation, and grate/frame combinations are available in stainless steel in CLASSIC design or anodized aluminum in CONTOUR design, both available in a variety of finishes. The 4″(100 mm) KERDI-DRAIN-STYLE grate assembly frame features a minimal reveal after installation. It is made of brushed stainless steel and can be combined with one of three grate design options: FLORAL (E), CURVE (F), or PURE (G). Various metallic and color-coated finishes are available. The 4″ (100 mm) TILE grate is a square stainless steel plate with KERDI laminated on the surface to allow for bonding of ceramic or stone tile, which creates a virtually invisible drainage line. The 6″ (150 mm) square and round stainless steel grate assembly frames feature an approximately 3/16″ (5 mm) wide reveal after installation and can be combined with stainless steel grates in CLASSIC design or a square clean out cover. Notes: The 4″ (100 mm) TILE grate and the 6″ (150 mm) square and round grates and clean out cover are not compatible with the 5-1/4″ (133 mm) adaptor kits. The 6″ (150 mm) grate assemblies and grate assemblies used with the 5-1/4″ (133 mm) adaptor kits only allow vertical and tilt adjustment (no lateral adjustment).
- Adaptor kits are used when the clamping ring drain cannot be removed
- Kit includes a stainless steel adaptor ring with an over-molded rubber gasket and a variety of perforated hole patterns that align with most common clamping ring shower drains
- The adaptor ring replaces the clamping ring and is attached to the drain body using the clamping ring bolts
- Connection is made watertight via the rubber gasket and KERDI-FIX adhesive/sealant
- Suitable for both KERDI-SHOWER-T/-TS/-TT shower tray and mortar bed applications
- Compatible with KERDI-SHOWER-T/-TS/-TT shower base and mortar bed installations
- Adapter ring: Schluter-Systems L.P., U.S. Patent No. D593,641, other patents pending
-
Sale!
Add to cartAbout this item:
Product Code: KSK9651525SABSE
This kit includes:
1 KERDI-SHOWER-T/-TS/-TT shower tray 38″ x 60″
2 KERDI-BOARD-SC shower curbs 38″ x 6″ x 4-1/2″
1 roll KERDI waterproofing membrane 3′ 3″ x 33′ = 108 ft2
1 roll KERDI-BAND waterproofing strip 5″ x 33′
1 KERDI-DRAIN ABS flange with 2″ outlet and 4″ stainless steel grate (E)
4 inside & 2 outside KERDI-KERECK preformed waterproofing corners
1 KERDI-SEAL-PS pipe seal 3/4″
1 KERDI-SEAL-MV mixing valve seal 4-1/2″
1 KERDI collar
Reviews
There are no reviews yet.